Our pickAn ESP32 and a CC1101 module
Local, no soldering, about thirty euros.
The open-source ESPSomfy-RTS firmware turns an ESP32 wired to a CC1101 module into an RTS remote: web interface, MQTT, up to 32 shades and 16 groups 11. Each shutter is paired with it as one more remote, and your remotes keep working.
It estimates each shutter’s position from its measured up and down travel times, and can hear presses on your physical remotes 11. The Miakapp coordinator drives it over MQTT.
| Hardware | Typical price |
|---|
| ESP32 development board 14 | ≈ €5 to €13 |
| CC1101 E07-M1101D-SMA module with antenna 15 | ≈ €3 to €16 |
| Wires, USB power supply, case | ≈ €5 to €10 |
| Total | ≈ €15 to €40 |
|---|
An RFXCOM USB stick
Ready to use, but pricier and hard to find.
Plugged into the coordinator’s machine, the RFXtrx433E drives Somfy RTS (the plain RFXtrx433 does not), with up to thirty virtual remotes 13. It can also talk to other 433 MHz devices in the house.
| Hardware | Typical price |
|---|
| RFXCOM RFXtrx433E, often out of stock 16 | ≈ €110 |
| Total | ≈ €110 |
|---|
If you already own a TaHoma
Keep it and use its local API.
In developer mode, the TaHoma opens an official local API on your network, which the agent queries from the coordinator 7. Somfy does not say whether every RTS shutter is exposed there: the agent checks on your box before relying on it.
| Hardware | Typical price |
|---|
| Somfy TaHoma Switch 9 | ≈ €175 |
| Total | already paid |
|---|
Prices checked in November 2026 at European retailers; they vary by country and over time.