An ESP32 instead of the Wi-Fi module
Local and two-way, for about a fifth of the module’s price.
The official module plugs into a connector on the indoor unit, CN22. Open projects put an ESP32 there that speaks the same serial protocol: set point, mode, fan, swing, and indoor and outdoor temperatures when the unit reports them 111213.
It works on models compatible with the RB-N105S-G and RB-N106S-G modules: Seiya, Shorai, Shorai Edge, Daiseikai 9, Suzumi Plus, among others 11. Technically: a 5-pin JST PA plug, a 5 V unit against 3.3 V for the ESP32 so a level shifter, and pin 5 must stay unconnected 11.
Only plug or unplug it with the unit switched off at the breaker 11. If you are not comfortable, have an installer fit the board: the agent prepares everything else.
| Hardware | Typical price |
|---|---|
| ESP32-DevKitC board 14 | ≈ €14 |
| 5 V ↔ 3.3 V level shifter 15 | ≈ €3 to €6 |
| Cable with a 5-pin JST PA plug, case | ≈ €5 |
| Total | ≈ €20 to €30 |